|Regular or cordless||Included Probe Diameter||Price|
|Tissue-Tearor (Reg 35000 rpm)||4.5 mm||
|Tissue-Tearor (Reg 35000 rpm)||7 mm||
|Tissue-Tearor (Reg 35000 rpm)||7 mm + extra length||
|Tissue-Tearor (Reg 35000 rpm)||14 mm||
|Tissue-Tearor (Cordless 25000 rpm)||4.5 mm||
|Tissue-Tearor (Cordless 25000 rpm)||7 mm||
|Tissue-Tearor (Cordless 25000 rpm)||7 mm + extra length||
|Tissue-Tearor (Cordless 25000 rpm)||14 mm||
The Tissue-Tearor is a rotor/stator type tissue homogenizer which can rapidly homogenize, disrupt, and emulsify samples in 0.5 - 1000 ml of liquid. Complete homogenization of tissues (muscle, liver, breast tissue, etc.) is usually achieved in ten to thirty seconds. Little, if any, heat is produced during the process.
When ordering select one of our four different probe sizes - 04, 07, XL, and 14. Unlike most competitive Brands of rotor-stator homogenizer, THE TISSUE-TEAROR COMES COMPLETE WITH BOTH THE HIGH-SPEED MOTOR AND ONE STAINLESS STEEL PROBE OF YOUR CHOICE. See chart below for probe selection guidance. Additional probes are available. All are interchangeable with the TT motor unit.
The Tissue-Tearor comes complete with a high speed, variable speed electric motor, one probe of your choice and a plastic storage stand*. All probes are interchangeable with the Tissue-Tearor motor. See our accessories link to order additional probes alone. *The Tissue-Tearor with the 14 mm diameter probe does not come with a plastic storage stand.
|Catalog Number||Practical Working Range (ml)||Probe Diameter (mm)||Probe Length (cm)|
* Dimensions taken from stator.
A cord-less variety of the TissueTearor is also available and includes a cordless (i.e., battery operated), high speed motor, one probe of your choice, a rechargeable 9.6 volt Li battery pack and a plug-in battery charger. The maximum speed of the 780CL is slightly slower than the line-operated TissueTearor (25,000 vs 35,000 rpm). However, 25,000 rpm is quite adequate for homogenizing soft tissue like muscle, liver, or brain.
|Sample Throughput||1 sample|
|Sample Volume (min)||200 µl|
|Sample Volume (max)||1 l|
|Usage / Placement||Handheld / Benchtop|
Sample Volume Range: 0.2 to 1000 ml, depending on the probe selected
Universal Motor: 110-120 volt, AC, 1.2 amp. Or, for some overseas applications, 230 volt, AC
Probes: Type 316 stainless steel with fluorocarbon bushings
Weight: Approximately 1/2 Kg
What is the minimum speed of the Tissue-Tearor?
The minimum speed is 5000 rpm.
What is the speed at each of the different numerical speed settings on the controls?
The speed is not calibrated at each numerical setting, but it will increase in an approximately linear fashion from the minimum speed (5,000 rpm) to the maximum speed (32,000 rpm).BioSpec 2017-10-04